Table of Contents
Advertisement
Table 9 Easy Mode: Control Panel (continued)
ITEM
Parental Control
Notification
5.6.1 Wi-Fi
Use this screen to configure security for the NBG6815's default wireless LAN. You can enter the
SSID and select the wireless security mode in the following screen. See
how to configure wireless network.
Note: You can enable the wireless function of your NBG6815 by first turning on the WIFI
switch in the back panel.
Figure 22 Easy Mode: Wi-Fi
The following table describes the labels in this screen.
Table 10 Easy Mode: Wi-Fi
LABEL
Wireless Radio
Network Name
(SSID)
Chapter 5 Easy Mode
DESCRIPTION
Switch ON to enable parental control, and click this to view the parental control
rules. Otherwise, switch OFF.
Refer to
Section 5.6.3 on page 33
Switch ON to have the NBG6815 send e-mail notifications when the user(s) is
connected to the NBG6815 for Internet access during the specified time periods.
Otherwise, switch OFF.
Refer to
Section 5.6.4 on page 33
DESCRIPTION
Choose whether you want to apply the wireless security to 2.4G Hz, 5G Hz or Both
wireless radios.
(Service Set IDentity) The SSID identifies the Service Set with which a wireless station is
associated. Wireless stations associating to the access point (AP) must have the same
SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN.
NBG6815 User's Guide
31
to see this screen.
to see this screen.
Chapter 14 on page 130
for
Advertisement
Table of Contents
