Static Dhcp Screen - ZyXEL Communications NBG6815 User Manual

Ac2200 mu-mimo dual-band wireless gigabit router
Hide thumbs Also See for NBG6815:
Table of Contents

Advertisement

Table 35 Expert Mode > LAN > LAN IP (continued)
LABEL
DHCP Server
IP Pool Starting
Address
Pool Size
Apply
Cancel

12.5 Static DHCP Screen

This screen allows you to assign IP addresses on the LAN to specific individual computers based on
their MAC addresses.
To change your NBG6815's static DHCP settings, click Expert Mode > LAN > Static DHCP.
Figure 68 Expert Mode > LAN > Static DHCP
The following table describes the labels on this screen.
Table 36 Expert Mode > LAN > Static DHCP
LABEL
#
MAC Address
IP Address
Add/Delete
Chapter 12 LAN
DESCRIPTION
Select Enable to activate DHCP for LAN.
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients (computers) to obtain TCP/IP configuration at startup from a server.
Enable the DHCP server unless your ISP instructs you to do otherwise. Select Disable
to stop the NBG6815 acting as a DHCP server. When configured as a server, the
NBG6815 provides TCP/IP configuration for the clients. If not, DHCP service is
disabled and you must have another DHCP server on your LAN, or else the computers
must be manually configured. When set as a server, fill in the following four fields.
This field specifies the first of the contiguous addresses in the IP address pool for LAN.
This field specifies the size, or count of the IP address pool for LAN.
Click Apply to save your changes back to the NBG6815.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This is the index number of the static IP table entry (row). Select Auto Detection to
automatically detect the MAC address of a computer on your LAN. Otherwise, select
User define to enter the MAC address of a computer on your LAN in the MAC Address
field.
This field displays the MAC address of a computer on your LAN. If you select User
define in the # field, enter the MAC address(es) manually.
This field displays the LAN IP address of a computer on your LAN. If you select User
define in the # field, enter the IP address(es) manually.
Click
to add the rule in the MAC filter summary table.
Click
to remove a rule.
NBG6815 User's Guide
103

Advertisement

Table of Contents
loading

Table of Contents