ZyXEL Communications NBG6815 User Manual page 111

Table 39 Expert Mode > Applications > Parental Control > General: Add/Edit new rules (continued)
LABEL
Network Service
Network
Service Setting
Add new
service
#
Service Name
Protocol:Port
Modify
Block Site/URL Keyword
Keyword
Keyword List
Apply
Back
13.2.1.2 Add/Edit a Service
Click Add new service in the Parental Control > Add new rules screen to add a new entry or
click the Edit icon next to an existing entry to edit it. Use this screen to configure a service rule.
Figure 72 Expert Mode > Applications > Parental Control > General: Add/Edit new rules: Add new
service
The following table describes the fields in this screen.
Table 40 Expert Mode > Applications > Parental Control > General: Add/Edit new rules: Add new
service
LABEL
Service Name
Protocol
Chapter 13 Applications
DESCRIPTION
If you select Block, the NBG6815 prohibits the users from using the services listed below.
If you select Allow, the NBG6815 blocks all services except ones listed below.
Click this to show a screen in which you can add a new service rule. You can configure the
Service Name, Protocol, and Port of the new rule.
This shows the index number of the rule. Select the checkbox next to the rule to activate it.
This shows the name of the service.
This shows the protocol and the port of the service.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Enter a keyword and click Add to add it to the keyword list. This has the NBG6815 block
access to the website URLs that contain the keyword.
Select a keyword and click Delete to remove it.
Click Clear All to remove all keywords from the keyword list.
Click Apply to save your settings back to the NBG6815.
Click Back to return to the previous screen.
DESCRIPTION
Select the name of the service. Otherwise, select UserDefined and manually specify the
protocol and the port of the service.
If you have chosen a pre-defined service in the Service Name field, this field will not be
configurable.
Select the transport layer protocol used for the service. Choices are TCP, UDP, or TCP/
UDP.
NBG6815 User's Guide
111