Table of Contents
Advertisement
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
5.
Select ADVANCED > Advanced Setup > Wireless AP.
6.
Select the Enable AP Mode check box.
7.
Scroll down and select an IP address setting:
•
Get dynamically from existing router. The other router on the network assigns an IP address to
this router while this router is in AP mode.
•
Enable fixed IP settings on this device (not recommended). Use this setting if you want to
manually assign a specific IP address to this router while it is in AP mode. Using this option effectively
requires advanced network experience.
Note
To avoid interference with other routers or gateways in your network, NETGEAR
recommends that you use different wireless settings on each router. You can also
turn off the wireless radio on the other router or gateway and use the R7500v2 router
only for wireless client access.
8.
Click the Apply button.
Network Settings
146
Advertisement
Table of Contents
