Connection - Yamaha DVD-S700 Operating Instructions Manual

ENGLISH

Connection

Never plug in this unit and other components until all connections are completed.
ÁBe sure that the colors of the connectors and plugs match up when connecting the cord.
ÁRead through the instructions for the equipment to be connected.
Connecting to an AV amplifier containing Dolby Digital (AC-3) or dts (digital theater
systems) decoder
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream is output from the player's OPTICAL
digital audio output connector or COAXIAL digital audio output connector. When the player is connected to a Dolby Digital decoder
or dts decoder, you can enjoy theater-quality audio in your home. [An optical digital cable or coaxial audio cable (both optional) is
required when an optional Dolby Digital decoder or dts decoder is used.]
h Coaxial audio
cable (optional)
COAXIAL
PCM/U DIGITAL
MPEG
OPTICAL
p S-video output connector
The S (separate) video output connector separates
the color (C) and luminance (Y) signals before
transmitting them to the TV set in order to achieve
a sharper picture.
Use the S-video cord (optional) when connecting
the player to a TV set equipped with an S-video in-
put connector for the best picture clarity possible.
Notes:
ÁDuring DVD play, the TV volume may be at a lower level
than during TV broadcasts, etc. If this is the case, adjust the
volume to the desired level.
ÁIf the DVD player is connected to the TV through a video
cassette recorder, the picture may not be played back nor-
mally with some DVDs. If this is the case, do not connect
20
Downloaded From Disc-Player.com Yamaha Manuals
the player via the VCR.
AUDIO SIGNAL VIDEO SIGNAL
R L VIDEO S-VIDEO
COAXIAL
DVD/
DVD/LD
LD
OPTICAL
j Video/
audio
cord
(supplied)
i Optical
digital
cable
k S-video
(optional)
cord
(optional)
6CH DISCRETE MIXED 2CH VIDEO
CENTER SURROUND MAIN
1
L
L L
R R
R
2
SUBWOOFER
DIGITAL
AUDIO OUT VIDEO OUT
DVD/
LD
S VIDEO
q Component video output connector (P
The component video output connector outputs the
color difference signals (P
nal (Y) separately in order to achieve high fidelity
in reproducing colors.
ÁThe description of the component video input
connectors may differ depending on the TV set or
monitor (e.g. P
on). Refer to the instruction manual of your TV
set for details.
ÁWhen the DVD player is connected to the TV set through
the component video output connectors, the ON SCREEN
informations from the amplifier will not show on the TV
screen. To show them, select the audio/video position which
has been connected to the amplifier on the TV set.
e AV amplifier with Dolby
Digital (AC-3)/dts
decoder (optional)
m To component video input
connector (P
l Video cable (optional)
g DVD/VIDEO CD/CD player
P
R
VIDEO OUT
P Y
B
/P
R
, P ) and luminance sig-
R B
/P /Y, R-Y/B-Y/Y, Cr/Cb/Y and so
R B
f TV set
(optional)
/P /Y)
R B
AC IN
/Y)
B
n AC power
cord
(supplied)
o To power outlet