Table of Contents
Advertisement
ENGLISH
Initial settings
Selecting digital output
Select the digital output to be output from the optical/coaxial
digital audio output connector of the unit.
1
At the initial settings screen
Press )/* to select "7 Digital Audio Out-
put" and press
SELECT.
2
Press )/* to select the preferred item
(1–3) and press SELECT.
When "1 LPCM (DVD)" is selected
Off:
Only linear PCM of 48 kHz/16 bit is output from the digi-
tal audio output connector. During playback of the DVD
recorded in the linear PCM of 48 kHz/20 bit/24 bit or
96 kHz, no digital audio is output. (Factory preset)
PCM:
During playback of the DVD recorded in the linear PCM
of 48 kHz/20 bit/24 bit or 96 kHz, digital audio converted
to 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to 48 kHz/
16 bit or below for copyright protection.)
When "2 Dolby Digital" is selected
Bitstream:
Dolby Digital (AC-3) bitstream (2ch–5.1ch) is out-
put. (Factory preset)
PCM:
PCM (2ch) of 48 kHz/16 bit is output.
When "3 dts" is selected
Off:
No output (Factory preset)
Bitstream:
dts bitstream is output.
3
Press )/* to select the preferred value at
each screen and press SELECT.
The screen illustrated in step 1 is displayed. Press )/* to
select "0" and press SELECT to return to the initial settings
screen.
For your reference:
ÁMake settings as shown in table
er that is connected to the optical/coaxial digital audio output con-
nector.
\1
Audio output from the unit's audio output connectors is converted to
48 kHz/16 bit in addition to audio from the digital audio output con-
nector.
To enjoy high quality sound at 48 kHz/20 bit/24 bit or 96 kHz, con-
nect the amplifier or decoder directly to the audio output connec-
tors, not to the digital audio output connector. [Select "Off" at the
"1 LPCM (DVD)".]
\2
When connecting an amplifier (with an optical/coaxial digital input
connector) which does not contain the Dolby Digital (AC-3) or dts
decoder, be sure to select "PCM" or "Off". If "Bitstream" is selected,
any attempt to play DVDs may cause such a high level of noise that
it may be harmful to your ears and damage your speakers.
Also refer to "Common procedures of initial settings" on
page 62.
76
Downloaded From Disc-Player.com Yamaha Manuals
)
Digital Audio Output
1 LPCM (DVD)
Off
2 Dolby Digital
Bitstream
3 dts
Off
0 Exit
*
depending on the kind of amplifi-
A
POWER
*/ I
@STOP
gSTILL/PAUSE
H
SKIP
I
TITLE
SELECT
ON SCREEN
SUBTITLE
AUDIO
MARKER
PLAY MODE
*
Type of amplifier to be
connected
No amplifier is connected
AV amplifier (with digital
audio input connector)
without Dolby Digital/dts
decoder
AV amplifier including Dolby
Digital decoder
AV amplifier including Dolby
Digital/dts decoder
+
Type d'amplificateur à
raccorder
Aucun amplificateur
raccordé
Amplificateur AV (avec
connecteur d'entrée audio
numérique) sans décodeur
Dolby Digital/dts
Amplificateur AV équipé d'un
décodeur Dolby Digital
Amplificateur AV équipé d'un
décodeur Dolby Digital/dts
,
Tipo de amplificador que
va a ser conectado
No está conectado un
amplificador
Amplificador AV (con
conectore de entrada de
audio digital) sin
descodificador Dolby Digital/
dts
Amplificador AV incluyendo
descodificador Dolby Digital
Amplificador AV incluyendo
descodificador Dolby Digital/
dts
1
OPEN/CLOSE
DPLAY
3
SLOW/
F
SEARCH
G
MENU
SELECT
RETURN
ANGLE
Recommendable setting
LPCM
Dolby
dts
(DVD)
Digital
Off
Bitstream
Off
\1
\2
\2
PCM
PCM
Off
\1
PCM
Bitstream
Off
\1
PCM
Bitstream
Bitstream
Réglage recommandé
LPCM
Dolby
dts
(DVD)
Digital
Non
Bitstream
Non
\1
\2
\2
PCM
PCM
Non
\1
PCM
Bitstream
Non
\1
PCM
Bitstream
Bitstream
Ajuste recomendado
LPCM
Dolby
dts
(DVD)
Digital
No
Bitstream
No
\1
\2
\2
PCM
PCM
No
\1
PCM
Bitstream
No
\1
PCM
Bitstream
Bitstream
Advertisement
Table of Contents
