Table of Contents
Advertisement
ENGLISH
Remote control preparation
Battery installation
Insert the batteries while observing the correct (o) and (p)
polarities as illustrated at right.
Service life of batteries
ÁThe batteries normally last for about one year although this
depends on how often, and for what operations, the remote
control is used.
ÁIf the remote control unit fails to work even when it is oper-
ated near the player, replace the batteries.
ÁUse size "AA" batteries.
Note:
ÁDo not use rechargeable (Ni-Cd) batteries.
ÁDo not attempt to recharge, short-circuit, disassem-
ble, heat or throw the batteries into the fire.
ÁDo not drop, step on or otherwise impact the remote
control unit. This may damage the parts or lead to
malfunction.
ÁDo not mix old and new batteries.
ÁIf the remote control unit is not going to be used for a
long time, remove the batteries. Otherwise, electrolyte
may leak which may lead not only to malfunctioning
but also to burns if contact is made with the electro-
lyte.
ÁWipe away any electrolyte leaking inside the remote
control unit, and install new batteries.
ÁIf any electrolyte should come into contact with parts
of your body, wash it off thoroughly with water.
Remote control operation range
Point the remote control unit from no more than about 23 feet
(7 m) from the remote control sensor and within about 60u of
the front of the unit.
ÁThe operating distance may vary according to the bright-
ness of the room.
Note:
ÁDo not point bright lights at the remote control sensor.
ÁDo not place objects between the remote control unit and
the remote control sensor.
ÁDo not use this remote control unit while simultaneously op-
erating the remote control unit of any other equipment.
26
Downloaded From Disc-Player.com Yamaha Manuals
)
*
A
B
Remote control signal sensor
Détecteur de signal de télécommande
Sensor de señales del mando a distancia
30˚
30˚
7
8
8
7
23 feet (7 m)
7 m (23 pieds)
23 pies (7 m)
Advertisement
Table of Contents
