Back Panel; Side Panel - Cisco UC320W Quick Start Manual

9 WPS On - WiFi Protected Setup succeeded. Slow flashing - Setup is in
progress. Fast flashing - Setup error. Off - Not in use. To configure a WiFi
connection by using WPS, make sure the wireless device is located near
the Cisco UC320W, and then press and hold this button until the WPS
light flashes.

Back Panel

1
4 3 2
LINE (FXO)
1 LINE (FXO) Connect phone lines for traditional phone service.
2 PHONE (FXS) Connect an analog phone or fax machine.
3 WAN Connect to the broadband network access device or to an uplink
port on an Ethernet switch that is connected to the Internet.
4 LAN Connect IP phones and other network devices.
5 LINE OUT Connect to an external speaker system.
6 LINE IN Connect to an external music source for Music On Hold service
(optional).
7 POWER Connect to a power source. Use only the provided power
adapter. Optionally, you can use the power cord retention clamp to
prevent accidental removal of the power cord. See instructions in the
Cisco UC320W administration guide.

Side Panel

1, 3 For future use.
2 RESET - Using a paperclip or similar object, press this button briefly to
restart the unit. Press and hold for 10 seconds to restore the factory
default settings.
6
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
2 3
4
1
WAN
PHONE
(10/100/1000)
(FXS)
1
4 5
3 2 1
LINE
LAN (10/100/1000)
OUT
2 3
Cisco UC320W Quick Start Guide
6 7
Power
LINE
IN 12VDC