Makita 9564CR Technical Information page 3

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Armature, Small Spiral Bevel Gear on Armature shaft (cont.)
DISASSEMBLING
(2) Remove Motor housing and Gear housing complete by loosening 4x18 Tapping screws (4pcs.). And then remove
M6 Hex nut or Retaing ring S-6 from Armature as illustrated in Fig. 3.
Fig. 3
Motor
housing
(3) Armature's Drive end can be disassembled as illustrated in Figs. 4, 5.
Fig. 4
Remove Flat washer 6.
Fig. 5
Remove Retaining ring S-12. And remove Armature from Gear housing cover with arbor press.
Now the disassembly of Armature's drive end is finished.
1R291
Retaining
ring S-12
M6 Hex nut
4x18
Tapping
screw (4pcs.)
Gear housing
complete
Gear
housing cover
Armature
Hooking Small Spiral bevel gear with the jaws of 1R269, remove the gear
together with Lock spring 12.
Small Spiral 1R269
bevel gear
Lock spring 12
Armature
Armature
Remove M6 Hex nut for 9564CR,
9564CVR, 9565CR and 9565CVR.
Wrench 10
Retaining ring S-6
Lock spring 12
Retaining
ring S-12
P 3/ 9
1R004
Remove Retaining ring S-6
for 9566CR and 9566CVR.
Small spiral bevel gear