Figure 4-12 Standard View Did Table Area Edit Popups - NEC UNIVERGE SV9100 Programming Manual

To setup the DID Translation Table and associate it with Trunk Groups:
1.
1) Use the right mouse
button to show the popup.
2.
3.
4-20
Select and define a Table Area within the DID Translation Table.
The DID Translation Table consists of 4000 entries that can be divided among
20 Table Areas, each being made up of a 1st and 2nd Area. Using the mouse,
right click a Table Area to define its 1st and 2nd entry ranges it uses. These
settings are linked with 22-10.

Figure 4-12 Standard View DID Table Area Edit Popups

When a Table Area is selected, the grid to the right is updated with the new
entry range. For example, selecting Area 01, 1
will result in the grid showing the DID Table entries 001 to 100.
Specify the selected Table Area entries and how they are treated with DID.
Table Area entries are located in the grid to the right of the Table Area list. It
defines DID Table Area entries and how they are directed within the system.
These settings are linked with 22-11.
Select the Night Mode to modify for DID.
Assign the Trunk Groups that use the Table Area via this Night Mode selection.
In addition, use this to help define the Intercept Ring Group calls get forward to
during Night Modes. Do this by completing the following:
Select a Night Mode.

Select the Trunk Groups during this Night Mode that will use the selected Table

Area.
2) Specify the entry ranges for
st nd
1 and 2 areas.
st
Area (entry ranges 001~100)
Standard View
ISSUE 2.0