Table of Contents
Advertisement
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
•
unplugged before carrying out any work on the tool.
Never use gasoline, benzine, thinner, alcohol or the
•
like. Discoloration, deformation or cracks may
result.
After use
Blow away dust from the inside of the tool by running the
tool at an idle for a while. Brush off accumulation of dust
on the base. Accumulation of dust in the motor or on the
base may cause a malfunction of the tool.
Replacement of carbon brushes
001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.
2
001679
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by an
Makita Authorized Service Center.
1. Limit mark
1
1. Brush holder cap
1
2. Screwdriver
7
Advertisement
Table of Contents
