SPECIFICATIONS Model M0401 Wheel diameter 110 mm Hole diameter 20 mm Max. diamond wheel thickness 2.0 mm Max. cutting capacity 32 mm Rated speed (n) / No load speed (n 13,800 min Overall length 231 mm Net weight 2.6 kg Safety class •...
Page 3
12. Use personal protective equipment. Always 26. Follow instruction for lubricating and chang- wear eye protection. Protective equipment such ing accessories. as dust mask, non-skid safety shoes, hard hat, or 27. Keep handles dry, clean and free from oil and hearing protection used for appropriate conditions grease.
Page 4
10. Keep bystanders a safe distance away from e) Do not attach a saw chain, woodcarving work area. Anyone entering the work area blade, segmented diamond wheel with a must wear personal protective equipment. peripheral gap greater than 10 mm or toothed Fragments of workpiece or of a broken wheel may saw blade.
Before plugging in the tool, always check to see diamond wheel. that the switch trigger actuates properly and • Use only the Makita wrench to install or remove returns to the "OFF" position when released. the diamond wheel. 5 ENGLISH...
Water flow ► 1. Wrench 2. Hex wrench 3. Diamond wheel To remove the diamond wheel, hold the outer flange ► 1. Tube holder 2. Vinyl tube with the wrench and loosen the hex bolt clockwise with the hex wrench. Then remove the hex bolt, outer flange Put the vinyl tube into the tube holder just like screwing and diamond wheel.
Take out the worn carbon brushes, insert the new ones and secure the brush holder caps. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be per- formed by Makita Authorized Service Centers, always using Makita replacement parts. 7 ENGLISH...