Example #1: Create Two Lags - NETGEAR 7000 Series Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Figure 6-1 shows the example network.
Figure 6-1

Example #1: Create two LAGS

(Netgear Switch) #config
(Netgear Switch) (Config)#port-channel lag_10
(Netgear Switch) (Config)#port-channel lag_20
(Netgear Switch) (Config)#exit
Use the show port-channel all command to show the logical interface ids you will use to identify
the LAGs in subsequent commands. Assume that lag_10 is assigned id 1/1/1 and lag_20 is
assigned id 1/1/2.
(Console) #show port-channel all
Port-
Log. Channel
Intf Name
------ --------------- ------ ---- ---- ------ ------- ------ --------- ------
1/1/1 lag_10
1/1/2 lag_20
6-2
Link
Adm. Trap STP
Link Mode Mode Mode
Down En. En.
Down En. En.
v1.0, May 2008
Mbr
Type Ports
Dis. Dynamic
Dis. Dynamic
Port Port
Speed Active
Link Aggregation