Example #5: (Config) Monitor Session 1 Source Interface; Example #6: (Interface) Port Security - NETGEAR 7000 Series Administration Manual

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2

Example #5: (Config) monitor session 1 source interface

Specify the source (mirrored) ports and destination (probe) port.
(Netgear Switch Routing)(Config)#monitor session 1 source?
interface Configure interface.
(Netgear Switch Routing)(Config)#monitor session 1 source interface?
<slot/port>
(Netgear Switch Routing)(Config)#monitor session 1 source interface 0/7
(Netgear Switch Routing)(Config)#monitor session 1 destination?
interface Configure interface.
(Netgear Switch Routing)(Config)#monitor session 1 destination interface?
<slot/port>
(Netgear Switch Routing)(Config)#monitor session 1 destination interface 0/8

Example #6: (Interface) port security

(Netgear Switch Routing)(Interface 0/7)#port-security ?
<cr> Press Enter to execute the command.
mac-address Add Static MAC address to the interface.
max-dynamic Set Dynamic Limit for the interface.
max-static Set Static Limit for the interface.
(Netgear Switch Routing)(Interface 0/7)#port-security max-static ?
<0-20> Set Static Limit for the interface.
(Netgear Switch Routing)(Interface 0/7)#port-security max-static 5
(Netgear Switch Routing)(Interface 0/7)#port-security max-dynamic 10
17-4
Enter the interface.
Enter the interface.
v1.0, May 2008
Port Mirroring