NETGEAR 7000 Series Administration Manual page 101

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Create VLAN 48, add port 1/0/48 to it, and assign IP address 192.168.48.1 to it.
(Netgear Switch) #vlan database
(Netgear Switch) (Vlan)#vlan 48
(Netgear Switch) (Vlan)#vlan routing 48
(Netgear Switch) (Vlan)#exit
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 1/0/48
(Netgear Switch) (Interface 1/0/48)#vlan participation include 48
(Netgear Switch) (Interface 1/0/48)#vlan pvid 48
(Netgear Switch) (Interface 1/0/48)#exit
(Netgear Switch) (Config)#vlan interface vlan 48
(Netgear Switch) (Interface-vlan 48)#routing
(Netgear Switch) (Interface-vlan 48)#ip address 192.168.48.1 255.255.255.0
(Netgear Switch) (Interface-vlan 48)#exit
(Netgear Switch) (Config)#exit
Create VLAN 38, add port 1/0/38 to it, and assign IP address 10.100.5.34 to it.
(Netgear Switch) #vlan database
(Netgear Switch) (Vlan)#vlan 38
(Netgear Switch) (Vlan)#vlan routing
(Netgear Switch) (Vlan)#exit
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 1/0/38
(Netgear Switch) (Interface 1/0/38)#vlan participation include 38
(Netgear Switch) (Interface 1/0/38)#vlan pvid 38
(Netgear Switch) (Interface 1/0/38)#exit
Netgear Switch) (Config)#interface vlan 38
(Netgear Switch) (Interface-vlan 38)#routing
(Netgear Switch) (Interface-vlan 38)#ip address 10.100.5.34 255.255.255.0
(Netgear Switch) (Interface-vlan 38)#exit
Enable IP routing on the switch.
(Netgear Switch) (Config)#ip routing
Add a default route so that all the traffic without a destination is forwarded
according to this default route.
(Netgear Switch) (Config)#ip route default 10.100.5.252
Create ACL 101 to deny all traffic that has destination IP 192.168.24.0/24.
(Netgear Switch) (Config)#access-list 101 deny ip any 192.168.24.0 0.0.0.255
Create ACL 102 to deny all traffic that has destination IP 192.168.48.0/24.
(Netgear Switch) (Config)#access-list 102 deny ip any 192.168.48.0 0.0.0.255
Access Control Lists (ACLs) 9-25
v1.0, May 2008