NETGEAR 7000 Series Administration Manual page 103
Netgear managed switch administration guide
Hide thumbs
Also See for 7000 Series:
- Administration manual (344 pages) ,
- Installation manual (2 pages) ,
- Installation manual (2 pages)
Table of Contents
Advertisement
b. Enter the following information in the VLAN Routing Wizard:
•
In the Vlan ID field, enter 24.
•
In the IP Address field, enter 192.168.24.1.
•
In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 24 twice until U displays. The U specifies that the egress
packet is untagged for the port.
e. Click Apply to save VLAN 24.
2. Create VLAN 48 with IP address 192.168.48.1:
a. From the main menu, select Routing > VLAN > VLAN Routing Wizard. A screen similar
to the following displays.
Figure 9-24
b. Enter the following information in the VLAN Routing Wizard:
•
In the Vlan ID field, enter 48.
•
In the IP Address field, enter 192.168.48.1.
•
In the Network Mask field, enter 255.255.255.0.
c. Click Unit 1. The ports display.
d. Click the gray box under port 48 twice until U displays. The U specifies that the egress
packet is untagged for the port.
Access Control Lists (ACLs)
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
v1.0, May 2008
9-27
Advertisement
Table of Contents
