Default Basic Wireless Settings; Basic 802.11A Wireless Settings - NETGEAR WGU624 Reference Manual

Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624

Default Basic Wireless Settings

When you first receive your WGU624, the default factory settings in effect are shown in the table
below. You can restore these defaults with the factory default reset button on the rear panel.
Table 4-2. Default Wireless Settings
Wireless Access Point Enabled
Wireless Access List (MAC Filtering) All wireless stations allowed
11b/g RF Channel 11
11a RF Channel 36
Authentication Type WPA-PSK
WPA-PSK passphrase NETGEAR-ULTRA-G
After you install the WGU624 wireless router, use the procedures below to customize any of the
settings to better meet your networking needs.

Basic 802.11a Wireless Settings

To configure the 802.11a wireless settings of your router, click the Wireless a link in the main
menu of the browser interface. The Wireless 802.11a Settings menu appears, as shown in
"Wireless 802.11a Settings menu" on page
4-4
FEATURE DEFAULT SETTINGS
SSID broadcast Enabled
SSID NETGEAR_11g for 802.11g
NETGEAR_11a for 802.11a
Mode g and b for 802.11g
a only for 802.11a
4-5.
M-10153-01
Wireless Configuration