NETGEAR WGU624 Reference Manual page 72

Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624
The Router Status screen displays the following parameters:
Table 6-1. Menu 3.2 - Wireless Router Status Fields
Field
Account Name
Firmware Version
Internet Port
MAC Address
IP Address
IP Subnet Mask
DHCP
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Wireless Port A
Name (SSID)
Channel
Wireless Mode
Wireless Port G
Name (SSID)
Channel
Wireless Mode
6-2
Description
The Host Name assigned to the router.
The router firmware version.
These parameters apply to the Internet (WAN) port of the router.
The Media Access Control address being used by the Internet (WAN) port of the
router.
The IP address used by the Internet (WAN) port of the router. If no address is
shown, the router cannot connect to the Internet.
The IP Subnet Mask used by the Internet (WAN) port of the router.
If set to None, the router is configured to use a fixed IP address on the WAN.
If set to Client, the router is configured to obtain an IP address dynamically from the
ISP.
These parameters apply to the Local (LAN) port of the router.
The Media Access Control address used by the LAN port of the router.
The IP address used by the Local (LAN) port of the router. The default is
192.168.1.1.
Identifies if the router's built-in DHCP server is active for the LAN attached devices.
The IP Subnet Mask used by the Local (LAN) port of the router. The default is
255.255.255.0
These parameters apply to the Wireless a port of the router.
The wireless network name (SSID) being used by the wireless port of the router.
The default is NETGEAR_11a.
Identifies if the channel the wireless port is using. See
page D-7 for the frequencies used on each channel.
802.11a, 108 Mbps, or Auto
These parameters apply to the Wireless g port of the router.
The wireless network name (SSID) used by the wireless port of the router. The
default is NETGEAR_11g.
Identifies if the channel the wireless port is using. See
page D-7 for the frequencies used on each channel.
802.11b+g, b only, g only, 108 Mbps, or Auto
M-10153-01
"Wireless Channels" on
"Wireless Channels" on
Maintenance