Manual Pppoe Configuration - NETGEAR WGU624 Reference Manual

Reference Manual for the Double 108 Mbps Wireless Firewall Router WGU624
Select you Internet service provider from the drop-down list.
a.
Figure 3-7: Basic Settings ISP list
The screen changes according to the ISP settings requirements of the ISP you select.
b.
If your Internet connection does require a login, fill in the settings according to the instructions
4.
below.
Note: After you finish setting up your router, you will no longer need to launch the ISP's login
program on your computer in order to access the Internet. When you start an Internet
application, your router will automatically log you in.
Select your Internet service provider from the drop-down list. Your choices are:
a.
• Other — if you have installed PPP software such as WinPoET (from Earthlink) or
Enternet (from Pacbell), then select Other. For more information, see
Configuration" on page
• PPTP — this protocol is used in Austria and other European countries. For more
information, see
• Telstra Bigpond — this protocol is used mainly in Australia. For more information,
see "Manual Telstra Bigpond Configuration" on page
The screen changes according to the ISP settings requirements of the ISP you select.
b.
Fill in the parameters for your Internet service provider.
c.
Click Apply to save your settings. Click the Test button to verify you have Internet access.
d.

Manual PPPoE Configuration

If your ISP uses PPPoE, select Other for the Internet Service Provider in the Basic Settings menu
to display the following menu:
Connecting the Router to the Internet
3-11.
"Manual PPTP Configuration" on page
M-10153-01
"Manual PPPoE
3-13.
3-15.
3-11