Configuring A Device Name; Configuring Lan Tcp/Ip Setup Parameters - NETGEAR RANGEMAX WNR3500 User Manual
Wireless-n gigabit router
Hide thumbs
Also See for RANGEMAX WNR3500:
- User manual (4 pages) ,
- Datasheet (2 pages) ,
- Setup manual (48 pages)
Table of Contents
Advertisement
NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500 User Manual
.
Figure 4-1
Configuring a Device Name
The device name is a user-friendly name for the router. This name is shown in the Network on
Windows Vista and the Network Explorer on all Windows systems. The Device Name field cannot
be blank. The default name is WNR3500.
Configuring LAN TCP/IP Setup Parameters
The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a
DHCP server. The router's default LAN IP configuration is:
•
LAN IP address. 192.168.1.1
•
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks and
should be suitable for most applications. If your network has a requirement to use a different IP
addressing scheme, you can make those changes in this screen.
4-2
v1.0, March 2008
Customizing Your Network Settings
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
