NETGEAR RANGEMAX WNR3500 User Manual page 122

NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500 User Manual
This field determines which operating frequency is used. It should not be necessary to change
the wireless channel unless you notice interference problems with another nearby wireless
router or access point. Select a channel that is not being used by any other wireless networks
within several hundred feet of your router. For more information about the wireless channel
frequencies, click the link to the online document
Appendix B.
5. Set the mode to Up to 300Mbps.
6. For Security Options, select None.
7. Click Apply to save your changes.
Note: If you are configuring the router from a wireless computer and you change the
router's SSID, channel, or security settings, you will lose your wireless
connection when you click Apply. You must then change the wireless settings
of your computer to match the router's new settings.
8. Select Wireless Settings under Advanced in the main menu of the WNR3500 router.
Figure 7-2
7-12
"Wireless Networking Basics" in
v1.0, March 2008
Troubleshooting