NETGEAR RANGEMAX WNR3500 User Manual page 44

NETGEAR RangeMax™ Wireless-N Gigabit Router WNR3500 User Manual
using the network configuration utilities of the computer. In WindowsXP, for example, typing the
command in an MSDOS command prompt window displays the MAC address as
ipconfig/all
Physical Address. You might also find the MAC addresses in the router's Attached Devices screen.
To restrict access based on MAC addresses:
1. Select Wireless Settings under Advanced in the main menu.
2. In the Advanced Wireless Settings screen, click Setup Access List to display the Wireless
Card Access List.
Figure 2-11
3. Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup screen opens and displays a list of currently active wireless cards and their
Ethernet MAC addresses.
2-20
v1.0, March 2008
Safeguarding Your Network