NETGEAR ProSafe FVS124G Reference Manual page 78

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
A firewall has two default rules, one for inbound traffic and one for outbound. The default rules of
the FVS124G are:
• Inbound: Block all access from outside except responses to requests from the LAN side.
• Outbound: Allow all access from the LAN side to the outside.
These default rules are shown in the Rules table of the Rules menu (under Security on the main
menu) in Figure 6-1:
Figure 6-1: Rules menu
You may define additional rules that will specify exceptions to the default rules. By adding custom
rules, you can block or allow access based on the service or application, source or destination IP
addresses, and time of day.
You can also tailor these rules to your specific needs (see
page 6-35).
6-2
"Administrator Information" on
Firewall Protection and Content Filtering
202-10085-01, March 2005