Enabling Dhcp To Automatically Configure Tcp/Ip Settings; Dhcp Configuration Of Tcp/Ip In Windows Xp - NETGEAR ProSafe FVS124G Reference Manual
Prosafe vpn firewall 25 with 4 gigabit lan and dual wan ports
Hide thumbs
Also See for ProSafe FVS124G:
- Specifications (2 pages) ,
- Reference manual (11 pages) ,
- Configuration manual (35 pages)
Table of Contents
Advertisement
Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
Enabling DHCP to Automatically Configure TCP/IP Settings
You will find there are many similarities in the procedures for different Windows systems when
using DHCP to configure TCP/IP.
The following steps will walk you through the configuration process for each of these versions of
Windows.
DHCP Configuration of TCP/IP in Windows XP
Locate your Network Neighborhood icon.
•
Select Control Panel from the Windows XP new Start Menu.
•
Select the Network Connections icon on the Control Panel. This will take you to the next
step.
• Now the Network Connection window
displays.
The Connections List that shows all the
network connections set up on the PC,
located to the right of the window.
• Right-click on the Connection you will
use and choose Status.
C-8
202-10085-01, March 2005
Preparing Your Network
Advertisement
Table of Contents
Troubleshooting
