Fully Qualified Domain Names - NETGEAR ProSafe FVS124G Reference Manual

Reference Manual for the ProSafe VPN Firewall 25 with 4 Gigabit LAN and Dual WAN Ports
Figure 7-1 shows the setup screens for the selected WAN mode. This setup is accomplished in
"Step 4: Configure the WAN Mode (Required for Dual WAN)" on page
Rollover Mode Setup Screen
Figure 7-1: WAN Mode Setup screens

Fully Qualified Domain Names

The use of fully qualified domain names is:
• Mandatory when the WAN ports are in rollover mode
• Mandatory when the WAN port are in load balancing mode and the IP addresses are dynamic
(Figure 7-3)
• Optional when the WAN ports are in load balancing mode the IP addresses are static
(Figure 7-3)
7-2
Load Balancing Mode Setup Screen
(Figure
202-10085-01, March 2005
4-15.
7-2)
Virtual Private Networking