Technical Specifications; Electrical Wiring; Compliance - Buffalo F249 Instruction Manual

Telephone Helpline: 0845 146 2887 (United Kingdom)

Technical Specifications

Model Voltage
F249 230V 50Hz

Electrical Wiring

This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency
disconnection being required they must be readily accessible.

Compliance

BUFFALO parts have undergone strict product testing in order to comply with regulatory standards and
specifications set by international, independent, and federal authorities.
BUFFALO products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO.
Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the
Power Current
1500W 6.5A
(100 cups)
right to change specifications without notice.
Weight
Capacity
(full)
15 litres 20kg
approx.
Brewing Dimensions
Time (full) w x d x h mm
60 minutes 530 x 360 x 280
approx.
UK
4