Troubleshooting; Technical Specifications - Buffalo APBG108 Instruction Manual

Table of Contents

Advertisement

*
Descaling
In hard water areas limescale can build up within the appliance after prolonged use. To descale the
appliance:
Pour a solution of descaler and water into the reservoir.
1.
Note: Use a suitable descaler and follow the instructions on the container.
Turn the Brewing power switch On
2.
After approximately 4 minutes turn the appliance Off to allow the descaling solution to work through
3.
the system.
After approximately 10 minutes turn the Brewing power switch back On
4.
empty.
Discard the solution collected in the jug.
5.
Fill the reservoir with clean water and turn the appliance back On to flush out the system and remove
6.
any descaler residue. Discard the collected water and rinse the jug.
The appliance is now ready for use
7.
Note: BUFFALO recommend that this appliance is descaled every 3 months or more
frequently in hard water areas.

Troubleshooting

Fault
The unit is not
The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Coffee is not
No water in reservoir
coming from the
Coffee is too compact within the
filter basket
filter
Loud noise coming
No water in reservoir
from appliance

Technical Specifications

Model
Voltage
G108-A
230V 50Hz
.
.
Probable Cause
Power
Current
2060W
9A
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Turn Off and fill reservoir
Turn off, loosen coffee within the filter and
resume
Turn Off and fill reservoir
Reservoir
Weight
Capacity
2.2 litres
5.8kg
. Allow the reservoir to
Action
Dimensions
h x w x d mm
465 x 205 x 385
4

Advertisement

Table of Contents
loading

Table of Contents