Maintenance; Protecting The Environment; Service Information; Specifications - Black & Decker JU350S Instruction Manual

ENGLISH
will automatically shut down.
This inflator can be used to inflate car tyres and sports
equipment.
Remove the inflator hose from the storage compartment.
If an adaptor is required, choose the correct adaptor for
the product you are inflating and fit it into the nozzle.
Fit the nozzle of the inflator or the adaptor, if fitted, to
the valve of the item to be inflated. Make sure that the
nozzle is locked in place.
Move the inflator on/off switch to the on position (I).
Monitor the pressure gauge until the required pressure
is reached.
Move the inflator on/off switch to the off position (0).
Remove the adaptor, if fitted, or the nozzle from the
inflated item.
Remove the adaptor, if fitted, and store it in the inflator
nozzle storage compartment (16).

MAINTENANCE

Your Black & Decker corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and
then switch off.
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
Regularly clean the ventilation slots in you appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust from
the interior (when fitted).

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be
disposed of with normal household waste. Should
you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the retailer
when you purchase a new product.
At the end of their useful life, discard batteries with
due care for our environment.
Do not short-circuit the battery terminals.
Do not dispose of the battery(s) in a fire as this may result
in a risk of personal injury or an Explosion.
Run the battery down completely, then remove it from
the tool.
Batteries are recyclable. Place the battery(s) in a suitable
packaging to ensure that the terminals cannot be hortcircuited.
Take them to any authorised repair agent or a local recycling
station.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. For
more information about our authorized service centers and if
you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you, or visit us at www.BlackandDecker-la.com

SPECIFICATIONS

JU350S
Battery Type 12V 9Ah
sealed lead
Output (instant) Amps
Output (constant for
5 seconds) Amps
USB Charging
Port Output 500mA
Weight 4,00 kg
Cargador de batería
Input
AR/B2
B2C
B3
BR
Approx. charging time
Weight 0,32 kg
18
JU450S
12V 17Ah
sealed lead
acid acid
350 450
225 300
500mA
6,4 kg
220V 220V
230V 230V
120V 120V
127V 127V
48h 48h
0,48 kg
JU450CB
12V 17Ah
sealed lead
acid
450
300
500mA
7 kg
220V
230V
120V
127V
48h
0,48 kg