Installation And Connections - NEC HT410 User Manual

Entertainment projector

Hide thumbs Also See for HT410:

Table of Contents

2. INSTALLATION AND CONNECTIONS

This section describes how to set up your projector and how to connect video and audio sources.

Your projector is simple to set up and use. But before you get started, you must first:

1 Set up a screen and the projector.

2 Connect your video equipment or computer to the projector. See page E-16 to E-19.

3 Connect the supplied power cable. See page E-20.

NOTE: Ensure that the power cable and any other cables are disconnected before moving the projector. When moving the

projector or when it is not in use, cover the lens with the lens cap.

E-10

Table of Contents

Ht510