NEC HT410 User Manual
  1. Manuals
  2. Brands
  3. NEC Manuals
  4. Projector
  5. HT410 Series
  6. User manual

NEC HT410 User Manual

Entertainment projector
Hide thumbs Also See for HT410:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Command Manual, Installation Manual
Entertainment Projector
HT510/HT410
User's Manual
English
Deutsch
Français
Italiano
Español
Svenska

Advertisement

Table of Contents
loading

Related Manuals for NEC HT410

Summary of Contents for NEC HT410

  • Page 1 Entertainment Projector HT510/HT410 User’s Manual English Deutsch Français Italiano Español Svenska...
  • Page 2 * FOR U.S.A. AND CANADA, PLEASE REFER TO THE STANDARD LIMITED WARRANTY SHEET INCLUDED WITH YOUR PROJECTOR OR CONTACT NEC Solutions (America) Inc. at 800-836-0655 or send e-mail to vsd.tech- support@necsam.com. * FOR EUROPE, PLEASE REFER TO THE GUARANTEE POLICY INCLUDED WITH YOUR PROJECTOR OR CONTACT YOUR LOCAL SALES ORGANIZA- TION WITHIN EUROPE.

  • Page 3: Limited Warranty

    5. In the event a product is returned to NEC Solutions for warranty service, and it is determined that there is no product defect or that the product condition is not covered by this limited warranty, a diagnostic service fee may be charged to the customer.

  • Page 4: Declaration Of Conformity

    Type of Product: Equipment Classification: Models: We hereby declare that the equipment specified above conforms to the technical standards as specified in the FCC Rules. NEC Solutions (America), Inc. 1250 N. Arlington Heights Road Itasca, Illinois 60143 (630) 467-5000 Projector...
  • Page 5 Entertainment Projector HT510/HT410 User’s Manual English Deutsch Français Italiano Español Svenska...

  • Page 6: Important Information

    IMPORTANT INFORMATION Safety Cautions Precautions Please read this manual carefully before using your NEC HT510/HT410 Projector and keep the manual handy for future reference. Your serial number is located on the bottom of your projector. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet.
  • Page 7 2. Place the projector on a flat, level surface in a dry area away from dust and moisture. To avoid premature lamp failure, do not tilt the front of the projector up or down by more than 15˚ from level.
  • Page 8 6. Do not cover the lens with the supplied lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap and possibly burning your hands due to the heat emitted from the light output.

  • Page 9: What's In The Box

    If this happens, contact your dealer for lamp replacement. • Allow a minimum of 60 seconds to elapse after turning off the projector. Then turn off the main power switch, disconnect the power cable and allow 60 minutes to cool the projector before replacing the lamp.

  • Page 10: Table Of Contents

    Freezing a Picture ... E-30 Reducing Vide Noise (Noise Reduction) ... E-30 Turning Off the Projector at the Preset Time (Off Timer) ... E-31 Getting the Information on Lamp Usage and Projector Usage ... E-31 5. USING ON-SCREEN MENU ... E-32 Using the Menus ...
  • Page 11 Information ... E-43 Page 1/2/3 ... E-43 Reset ... E-44 Returning to Factory Default [Factory Default]/Clearing Lamp Hour Meter [Clear Lamp Hour Meter] ... E-44 6. MAINTENANCE ... E-45 Replacing the Lamp ... E-45 Cleaning the Cabinet and the Lens ... E-48 7.

  • Page 12: Introduction

    With the HT510/HT410 you will enjoy projecting images up to 200” (measured diagonally) from your DVD player, VCR, satellite hookup, HDTV source, PC or Macintosh computer (desktop or notebook) and images from your digital camera. The HT510/HT410 can be setup on a coffee table, tabletop, cart, bookshelf or permanently installed* function remote, you will be ready to immerse yourself in big screen enjoyment.
  • Page 13 1. INTRODUCTION About this user's manual The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to review the user's manual. This may save you time later on. At the beginning of each section of the manual you'll find an overview.

  • Page 14: Part Names Of The Projector

    Main Power Switch When you plug the supplied power cable into an active wall outlet and turn on the Main Power, the POWER indicator turns orange and the projector is in standby mode. (See page E-21) Ventilation (outlet) Terminal Panel...

  • Page 15: Top Features

    Top Features 1. ON/STAND BY button ( Use this button to turn the power on and off when the main power is supplied and the projector is in standby mode. To turn on the projector, press and hold this button for a minimum of two seconds. To turn off the projector, press this button twice.

  • Page 16: Terminal Panel Features

    7. PC CONTROL Port (Mini DIN 8 Pin) Use this port to connect a PC or control system. This enables you to control the projector using serial commu- nication protocol. If you are writing your own program, typical PC control codes are on page E-57.

  • Page 17: Part Names Of The Remote Control

    2. POWER ON Button When the main power is on, you can use this button to turn your projector on. NOTE: To turn on the projector, press and hold the POWER ON button for a minimum of two seconds. 3. POWER OFF Button You can use this button to turn your projector off.
  • Page 18 Press this button to correct the keystone (trapezoidal) distortion, and make the image square. See page E-26. 21. HELP Button Provides the information about the status of the projector. 22. LIGHT Button Use this button to turn on or off the button’s backlight. If another button is not pressed within 10 seconds while...

  • Page 19: Battery Installation

    Battery Installation Press firmly and slide the battery cover off. Remove both old batteries and install new ones (AAA). Ensure that you have the batteries' polarity (+/–) aligned correctly. Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries.

  • Page 20: Operating Range For Wireless Remote Control

    • The projector will not respond if there are objects between the remote control and the sensor, or if strong light falls on the sensor. Weak batteries will also prevent the remote control from properly operating the projector.

  • Page 21: Installation And Connections

    3 Connect the supplied power cable. See page E-20. NOTE: Ensure that the power cable and any other cables are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap.

  • Page 22: Setting Up The Screen And The Projector

    (HT510) from the wall or screen. The largest the image can be is 200" (5.0 m) when the projector is roughly 8.0 m/316 inches (HT410) and 6.7 m/263 inches (HT510) from the wall or screen. Use the drawing below as a guide.

  • Page 23: Throw Distance And Screen Size

    * Do not attempt to install the projector yourself. • Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the projector severely damaged. • Do not use the projector where temperatures vary greatly. The projector must be used at temperatures be- tween 41˚F (5˚C) and 95˚F (35˚C).
  • Page 24 2. INSTALLATION AND CONNECTIONS HT510 Distance Chart Minimum Lens Shift Position Screen Size (16:9) Diagonal Width Height inch inch inch 26.1 14.7 40 1016 34.9 19.6 55 1397 47.9 1218 27.0 60 1524 52.3 1328 29.4 72 1829 62.8 1594 35.3 73 1854 63.6 1616...
  • Page 25 HT410 Distance Chart Minimum Lens Shift Position Screen Size (16:9) Diagonal Width Height inch inch inch inch 26.1 14.7 4.9 124.1 40 1016 34.9 19.6 6.5 165.5 55 1397 47.9 1218 27.0 9.0 227.4 60 1524 52.3 1328 29.4 9.8 248.1 72 1829 62.8 1594...

  • Page 26: Using The Lens Shift Feature

    2. INSTALLATION AND CONNECTIONS Using the Lens Shift Feature • Manual vertical lens shift provides simple vertical image positioning. Rotate the Lens Shift Dial to move the lens up or down. Lens shift dial CAUTION: When the lens shift dial gives resistance, it means the lens shift mechanism has reached the minimum or maximum range of vertical shift.

  • Page 27: Making Connections

    AUDIO IN Audio cable (supplied) You can connect your projector to a DVD player with component output or Video output. To do so, simply: 1. Turn off the power to your projector and DVD player. 2. If your DVD player has the component video (Y,Cb,Cr) output, use the supplied component video cable (RCA 3) to connect your DVD player to the COMPONENT IN connectors on the projector.

  • Page 28: Connecting Your Vcr Or Laser Disc Player

    2. Connect one end of your RCA or S-Video cable to the video output connector on the back of your VCR or laser disc player, connect the other end to the Video input on your projector. Use an audio cable (supplied) to connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc player has this capability).

  • Page 29: Connecting Your Pc Or Macintosh Computer

    Connecting Your PC or Macintosh Computer NOTE: When using with a notebook PC, be sure to connect between the projector and the notebook PC before turning on the power to the notebook PC. In most cases signal cannot be output from RGB output unless the notebook PC is turned on after connecting with the projector.

  • Page 30: To Connect Scart Output

    1. Turn off the power to the projector and your video equipment. 2. Use the SCART adapter to connect the Video input of the projector and a SCART output of your video equipment. 3. Turn on the power to the projector and your video equipment.

  • Page 31: Connecting The Supplied Power Cable

    Connecting the Supplied Power Cable Connect the supplied power cable to the projector. First connect the supplied power cable's two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet.

  • Page 32: Projecting An Image (Basic Operation

    • When plugging in or unplugging the supplied power cable, make sure that the main power switch is pushed to the off (O) position. Failure to do so may cause damage to the projector. To turn on the main power to the projector, press the Main Power switch to the on ( I ) position. The POWER indicator will light orange.
  • Page 33 If you want, you can select the menu language later. See "Language" on page E-38. NOTE: Immediately after turning on the projector, screen flicker may occur. This is not a fault. Wait 3 to 5 minutes until the lamp lighting is stabilized.

  • Page 34: Selecting A Source

    Selecting the computer or video source Using the cabinet buttons Press and quickly release the SOURCE button on the projector cabinet to display the Source list. Each time the SOURCE button is pressed, each source name will be highlighted in sequence.
  • Page 35 NOTE: A spacer is attached to the adjustable rear foot to provide stability. Remove the spacer before using the adjustable rear foot. Save the spacer to use when replacing the lamp as it will keep the projector from tilting in the process (See page E-45). Adjustable Rear Foot CAUTION: Use care in handling the adjustable rear foot to avoid possible injury to fingers or hands.
  • Page 36 1. Lift the front edge of the projector. Adjustable Tilt Foot Lever 2. Push up the Adjustable Tilt Foot Lever on the front side of the projector to extend the adjustable tilt foot (maximum height). 3. Push down the Adjustable Tilt Foot Lever.

  • Page 37: Correcting The Vertical Keystone Distortion

    The Keystone correction feature will correct the vertical distortion of a projected image on the screen. NOTE: Keystone angle can be corrected between 15 degrees upward and 15 degrees downward of projector tilt from level. To correct keystone distortion using the KEYSTONE +/- button: 1.

  • Page 38: Optimizing An Rgb Image Automatically

    POWER COMPONENT COMPUTER VIDEO C-VIDEO COMP. AUTO ADJ. S-VIDEO AUTO [Normal picture] increase volume decrease volume buttons on the projector cabinet work as a volume control. E-27 Remote control PIC-MUTE OFF TIMER MUTE FREEZE TIMER HELP VOLUME KEY STONE LIGHT...

  • Page 39: Turning Off The Projector

    Turning off the Projector To turn off the projector: First, press the ON/STAND BY button on the projector cabinet or the POWER OFF button on the remote control. The “Power Off / Are you sure?” message will appear. Cabinet controls...

  • Page 40: After Use

    Preparation: Make sure that the projector’s main power is off. 1. Unplug the power cable. 2. Disconnect any other cables. 3. Retract adjustable tilt foot if extended. 4. Cover the lens with the lens cap. 5. Put the projector and its accessories in the supplied soft case. E-29...

  • Page 41: Convenient Features

    4. CONVENIENT FEATURES Turning Off the Image and Sound Press the MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. Freezing a Picture Press the FREEZE button to freeze a picture. Press again to resume motion. Reducing Video Noise (Noise Reduction) You can reduce video noise by using the N.

  • Page 42: Turning Off The Projector At The Preset Time (Off Timer

    You can also set the Off Timer using the menu. See page E-38. Getting the Information on Lamp Usage and Projector Usage You can view various information such as status of the remaining lamp time, lamp hour meter and projector usage.

  • Page 43: Using On-Screen Menu

    3. Press the ENTER button on the remote control or the projector cabinet to select a submenu or item. SOURCE SELECT AUTO ADJ. 4. Use the SELECT GH buttons on the remote control or the projector cabinet to select the item you want to adjust or set. SOURCE SELECT AUTO ADJ.
  • Page 44 5. USING ON-SCREEN MENU 5. Adjusting the level of a selected item or selecting an item. SELECT AUTO ADJ. For Adjusting items (Slide bar) Slide bar ... Indicates settings or the direction of adjustment. • Use the SELECT buttons to adjust the item. For Selecting items (Solid triangle) Solid triangle ..

  • Page 45: List Of Menu Items

    Auto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM S-Video Auto, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N, PAL60, SECAM Information Page 1 Remaining Lamp Time, Lamp Hour Meter, Projector Usage Page 2 Horizontal Frequency, Vertical Frequency, Sync Polarity, Video Type, Sync Type, Interlace Page 3...

  • Page 46: Menu Descriptions & Functions

    5. USING ON-SCREEN MENU Menu Descriptions & Functions Picture You can adjust brightness, contrast, sharpness, color, hue, noise reduction and Telecine. NOTE: When one of Brightness, Contrast, Sharpness, Color or Hue is highlighted, pressing the ENTER button will display its slide bar for adjustment. Brightness ...

  • Page 47: Adjusting Color Management [Color Management]/Selecting Gamma Correction Mode [Gamma Correction]/ Adjusting Color Temperature [Color Temperature]/Adjusting White Peaking [White Peaking

    This option enables you to save your current keystone settings. Off ... Does not save current keystone correction settings On ... Saves current keystone correction settings Saving your change once affects all sources. The changes are saved when the projector is off. 5. USING ON-SCREEN MENU E-36...

  • Page 48: Selecting Aspect Ratio [Aspect Ratio]/Adjusting The Horizontal/Vertical Position, Clock And Phase [Position/Clock

    5. USING ON-SCREEN MENU Selecting Aspect Ratio [Aspect Ratio] Aspect Ratio allows you to select the best Aspect mode to display your source image. You can also display the Aspect Ratio window by pressing the ASPECT button on the remote control. (See page E-7).

  • Page 49: Setup

    You can choose between two color modes for menu color: color and monochrome. Selecting Menu Display Time [Menu Display Time] This option allows you to select how long the projector waits after the last touch of a button to turn off the menu.

  • Page 50: Advanced

    Preventing the Unauthorized use of the projector [Security] A keyword can be set for your projector to avoid operation by an unauthorized user using the Menu. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the projector cannot project an image.
  • Page 51 3. Type in a combination of the four SELECT NOTE: A keyword must be four to 10 digits in length. The [Confirm Keyword] screen will be displayed. 4 Type in the same combination of SELECT The confirmation screen will be displayed. 5.
  • Page 52 3. Type in your keyword and press the ENTER button. When the correct keyword is entered, the Security function will be disabled. When the Security function is enabled and the projector is turned on, the projector will display a blue back- ground.

  • Page 53: Disabling The Cabinet Buttons [Cabinet Button]/Enabling Fan Speed Mode [Fan Mode]/ Enabling Power Management [Power Management]/Selecting Signal Format [Signal Select

    High ... The built-in fans run at a fixed high speed. When you wish to cool down the temperature inside the projector quickly, select “High”. NOTE: It is recommended that you select High speed mode if you continue to use the projector for consecutive days. Enabling Power Management [Power Management] When this option is turned on and there is no input for five minutes or more, the projector will automatically turn itself off.

  • Page 54: Information

    0, the Remaining Lamp Time bar in- dicator changes from 0% to 100 Hours and starts counting down. If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the lamp mode is set to Normal or Eco. [Page 2]...

  • Page 55: Reset

    Resets the lamp clock back to zero. Selecting this option displays submenu for a confirmation. NOTE: The projector will turn off and go into standby mode after 2100 hours (up to 3100 hours in Eco mode) of service. If this happens, press the HELP button on the remote control for ten seconds to reset the lamp clock back to zero. Do this only after replacing the lamp.

  • Page 56: Maintenance

    • The projector will turn off and go into stand by mode after 2100 (up to 3100 hours in Eco mode) hours of service. If this happens, be sure to replace the lamp. If you continue to use the lamp after 2000 hours (up to 3000 hours in Eco mode) of use, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case.
  • Page 57 1. Loosen the lamp cover screw until the screwdriver goes into a freewheeling condition and remove the lamp cover. The lamp cover screw is not removable. 2. Loosen the two screws securing the lamp housing until the screwdriver goes into a freewheeling condition. The two screws are not removable.
  • Page 58 NOTE: When the lamp exceeds 2100 hours (up to 3100 hours in Eco mode) of service, the projector cannot turn on and the menu is not displayed. If this happens, press the HELP button on the remote control for a minimum of 10 seconds while in standby mode.

  • Page 59: Cleaning The Cabinet And The Lens

    Cleaning the Cabinet and the Lens D IO N T R 1. Turn off the projector before cleaning. 2. Clean the cabinet periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinner.

  • Page 60: Troubleshooting

    7. TROUBLESHOOTING 7. TROUBLESHOOTING This section helps you resolve problems you may encounter while setting up or using the projector. Power Indicator Indicator Condition Blinking light Green 0.5 sec On, 0.5 sec Off 2.5 sec On, 0.5 sec Off Orange 0.5 sec On,...

  • Page 61: Common Problems & Solutions

    • Ensure that the lamp cover or lamp housing is installed correctly. See page E-47. • Check to see if the projector has overheated or the lamp has reached the end of its usable life. If there is insufficient ventilation around the projector or if the room where you’re presenting is particularly warm, move the projector...
  • Page 62 • Ensure that the distance between the projector and screen is within the ad- justment range of the lens. See pages E-11 to E-14. • Condensation may form on the lens if the projector is cold, brought into a warm place and is then turned on. Should this happen, let the projector stand until there is no condensation on the lens.
  • Page 63 Usually, the combination of the ‘Fn” key along with one of the 12 function keys gets the external display to come on or off. For example, NEC laptops use Fn + F3, while Dell laptops use Fn + F8 key combi- nations to toggle through external display selections.

  • Page 64: Specifications

    8. SPECIFICATIONS 8. SPECIFICATIONS This section provides technical information about the HT510/HT410 Projector's performance. Model Number HT510/HT410 Optical Single Chip Digital Micromirror Device (DMD) Resolution HT510: 1024 576 pixels* HT410: 854 480 pixels* Lens Manual zoom and focus, manual lens shift F2.0 - 2.48 f=19.5 mm - 23.0 mm...
  • Page 65 Meets AS/NZS CISPR 22 Class B Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3) Meets Low Voltage Directive (EN60950, TÜV GS Approved) For additional information visit: US : http://www.necvisualsystems.com Europe : http://www.neceurope.com/ Global : http://www.nec-pj.com/ The specifications are subject to change without notice. 8. SPECIFICATIONS E-54...

  • Page 66: Appendix

    9. APPENDIX 9. APPENDIX Cabinet Dimensions SHIFT LENS DOWN ADJ. AUTO ON/STAND SELECT SOURCE POWER STATUS LAMP FOCUS 7.36"/187.0 2.07"/52.5 E-55 Unit = inch/mm...

  • Page 67: Pin Assignments Of Computer In (D-Sub Rgb) Connector

    Pin Assignments of COMPUTER IN (D-Sub RGB) Connector Mini D-Sub 15 Pin Connector Signal Level Video signal : 0.7Vp-p (Analog) Sync signal : TTL level Pin No. RGB Signal (Analog) Green or Sync on Green Blue Ground Ground Red Ground Green Ground Blue Ground No Connection...

  • Page 68: Pc Control Codes And Cable Connection

    NOTE: Depending on the equipment, a lower baud rate may be recommended for long cable runs. PC Control Connector (Mini DIN-8P) To GND of PC NOTE: Pins 2, 3, 5, 6 and 8 are used inside the projector. Code Data To RxD of PC...

  • Page 69: Compatible Input Signal List

    Compatible Input Signal List Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) Vertical: 50 Hz to 85 Hz Signal NTSC PAL60 SECAM VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA SXGA+ SDTV(480p)(525p)

  • Page 70: Troubleshooting Check List

    Video and Audio No image is displayed from your PC or video equipment to the projector. Still no image even though you connect the projector to the PC first, then start the PC. Enabling your notebook PC’s signal output to the projector.
  • Page 71 Sync on Green STATUS Indicator: Steady light Orange Flashing light ] cycles Remote control model number: Projector DVD player Signal cable NEC standard or other manufacturer’s cable? Model number: Length: Distribution amplifier Model number: Switcher Model number: Adapter Model number: Installation environment...

  • Page 72: Travelcare Guide

    Please note that TravelCare coverage differs in part from coverage under the warranty included with the product. Services offered with TravelCare This warranty allows customers to receive service on their product at the NEC and NEC-designated service stations in the countries listed herein when temporarily traveling internationally for business or pleasure.
  • Page 73 This list applies as of April 1, 2004. For the most up-to-date information, please refer to the websites of the service stations in the various countries on the List of TravelCare Outlets or to the NEC website at http://www.nec-pj.com. In Europe NEC Europe, Ltd.
  • Page 74 +886 2 8500 1420 Email Address: nickliao@nec.com.tw WEB Address: http://www.nec.com.tw (Regions Covered) Taiwan NEC Solutions Asia Pacific Pte. Ltd Address: 401 Commonwealth Drive, #07-02, Haw Par Technocentre, Singapore 149598 Telephone: +65 6 273 8333 Fax Line: +65 6 274 2226 Email Address: tehgh@rsc.ap.nec.com.sg...
  • Page 75 Nautilus Hyosung Inc. Address: 7th Floor, Cheongdam Building, 52, Cheongdam-Dong, Kangnam-Ku, Seoul, Korea 135-100 Telephone: +82 2 510 0234 Fax Line: +82 2 540 3584 Email Address: hds-ykc@hyosung.com (Regions Covered) South Korea Lenso Communication Co., Ltd. Address: 292 Lenso House 4, 1st Floor, Srinakarin Road, Huamark, Bangkapi, Bangkok 10240, Thailand Telephone: +66 2 375 2425...
  • Page 76 9. APPENDIX Date: TO: NEC or NEC's Authorized Service Station: (Company & Name with signature) Dear Sir (s), I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your following conditions, and also the Service fee will be charged to my credit card account, if I don't return the Loan units within the specified period.
  • Page 77 This program does not apply if the Projector's serial number has been defaced, modified or removed. If, in the judgement of NEC Authorized Service Station or its agent the defects or failures result from any cause other than fair wear and tear or NEC neglect, or fault including the following without limitation: 1) Accidents, transportation, neglect, misuse, abuse, water, dust, smoke or default of or by the Customer its employees or agents or any third party;...
  • Page 78 If Customer does not return the unit within the 12 calendar days, Customer will be charged the next highest cost up to and including the full list price to Credit Cards, which price will be informed by NEC Authorized Service Stations.
  • Page 79 Ver. 2 09/04 (T)
  • Page 80 Copyright© 2004 by NEC Viewtechnology, Ltd. Printed in China 7N8P5192...

This manual is also suitable for:

Ht510

Table of Contents