Part Names Of The Remote Control - NEC HT410 User Manual

Part Names of the Remote Control

1. Infrared Transmitter
Direct the remote control toward the remote sensor on the projector cabinet.
2. POWER ON Button
When the main power is on, you can use this button to turn your projector on.
NOTE: To turn on the projector, press and hold the POWER ON button for a minimum of two seconds.
3. POWER OFF Button
You can use this button to turn your projector off.
NOTE: To turn off the projector, press the POWER OFF button twice.
4. VIDEO Button
Press this button to select a video source connected to the VIDEO input.
5. S-VIDEO Button
Press this button to select an S-Video source connected to the S-VIDEO input.
6. C-VIDEO Button (COMPONENT)
Press this button to select a video source from component equipment connected to the COMPONENT input.
3
OFF POWER
COMPONENT
4
VIDEO C-VIDEO
5
S-VIDEO
10
MENU
11
ENTER
NOISE RED.
13
ASPECT N.R.
PIC-MUTE
15
MUTE FREEZE
16
KEY STONE
VOLUME
1
2
ON
COMPUTER
7
COMP.
AUTO ADJ.
8
AUTO
6
9
12
EXIT
14
17
PICTURE
18
OFF TIMER
19
TIMER
21
HELP
20
22
LIGHT
E-6
1. INTRODUCTION