Makita BHP459 Technical Information page 7

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear Assembly, Rotor Section (cont.)
ASSEMBLING
Assemble Gear assembly and Rotor section to Housing L. (Fig. 13)
Fig. 13
Projection of
Gear assembly
2. Mount Gear assembly and Rotor section
to Housing L with the projection
on the groove.
3. Make sure that the ribs of Housing L are
fitted tightly in the notches of Stator.
[3]-3. F/R change lever
F/R Change lever can be assembled to Switch. (Fig. 14)
Fig. 14
Before assembling Switch to Housing L,
fit the prong of F/R change lever to
the projection of Switch.
F/R change
lever
Groove of Housing L
Housing L
prong portion
projection
1. Make sure to put Leaf spring
in place as drawn below.
Rib
Notch of Stator
Stator
Notch of Stator
Rib
P 7/ 11
Leaf spring
Housing L