Specifications - Makita JR3050T Instruction Manual

ENGLISH
1-1. Shoe
1-2. Shoe button
2-1. Shoe button
2-2. Shoe
3-1. Switch trigger

SPECIFICATIONS

Length of stroke
Max. cutting capacities
Strokes per minute (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for sawing wood, plastic, metal and
building materials with a strong impact. It is suitable for
straight and curved cutting.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 2.5 m/s
For European countries only
EC Declaration of Conformity
We Makita Corporation
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Recipro Saw
Explanation of general view
3-2. Lock button
4-1. Blade clamp sleeve
4-2. Released position
4-3. Fixed position
5-1. Blade
Model
Pipe
Wood
-1
)
Overall length
Net weight
Safety class
) : 88 dB(A)
pA
) : 99 dB(A)
WA
value (tri-axial vector
2
) : 22.0 m/s
h,CW
2
as the responsible
ENE021-1
Model No./ Type: JR3050T
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
ENF002-1
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
Milton Keynes, MK15 8JD, England
ENG102-3
000230
ENG220-2
sum)
RECIPRO SAW SAFETY
ENH101-13
WARNINGS
1. Hold
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
3
6-1. Blade clamp lever
8-1. Limit mark
9-1. Brush holder cap
9-2. Screwdriver
JR3050T
28 mm
130 mm
255 mm
0 - 2,800
452 mm
3.3 kg
/II
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
power tool by insulated
GEB008-6
gripping