Procedure For Tilting Down (Manual Tilt Models) - Yamaha 40V Owner's Manual

Operation
UP
UP
DN
3. Pull the tilt support lever toward you to
support the engine. WARNING! After
tilting the outboard motor, be sure to
support it with the tilt support knob or
tilt support lever. Otherwise the out-
board motor could fall back down
suddenly if oil in the power trim and
tilt unit or in the power tilt unit loses
pressure.
[EWM00262]
the tilt support lever or knob when
trailering the boat. The outboard mo-
60
ZMU01935
UP
ZMU04993
NOTICE: Do not use
tor could shake loose from the tilt
support and fall. If the motor cannot
be trailered in the normal running po-
sition, use an additional support de-
vice to secure it in the tilt position.
For more detailed information, see
page 64.
[ECM01641]
4. Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch "
trim rods. NOTICE: Be sure to retract
the trim rods completely during
mooring. This protects the rods from
marine growth and corrosion which
could damage the power trim and tilt
mechanism.
[ECM00251]
EMU34470
Procedure for tilting down (manual
tilt models)
1. Release the tilt lock lever.
ZMU03115
" (down) to retract the
ZMU03786