Procedure For Tilting Down (Manual Tilt Models); Procedure For Tilting Down - Yamaha F20A Owner's Manual

4. Push the tilt support knob into the clamp
bracket or pull the tilt support lever to-
ward you to support the engine.
EWM00260
WARNING
After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
in the power trim and tilt unit loses pres-
sure.
5. Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch "
trim rods.
ECM00250
CAUTION:
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
UP
ZMU02823
ZMU02812
" (down) to retract the
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU30190
Procedure for tilting down (manual
tilt models)
1. Place the tilt lock lever in the lock posi-
tion.
2. Slightly tilt the engine up until the tilt sup-
port bar is automatically released.
3. Slowly tilt the engine down.
EMU28053

Procedure for tilting down

Power trim and tilt models / power tilt models
1. Push the power tilt / power trim and tilt
switch " " (up) until the outboard motor
is supported by the tilt rod and the tilt
support lever / tilt support knob becomes
free.
2. Release the tilt support lever or pull out
the tilt support knob.
Operation
ZMU02306
ZMU02825
35