Procedure For Tilting Down (Manual And Hydro Tilt Models) - Yamaha F30A Owner's Manual

Operation
NOTE:
Multifunction tiller handle: The warning indi-
cator may faintly light momentarily while us-
ing the power trim and tilt switch / power tilt
switch. This occurs due to the noise from
power trim and tilt relay operation and does
not indicate a malfunction.
UP
UP
DN
4. Push the tilt support knob into the clamp
bracket or pull the tilt support lever to-
ward you to support the engine.
39
EWM00260
After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
in the power trim and tilt unit loses pres-
ZMU01935
sure.
5.
UP
ECM00250
CAUTION:
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
ZMU04067
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU28041
Procedure for tilting down (manual
and hydro tilt models)
1.
WARNING
Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch / power tilt switch "
(down) to retract the trim rods.
Release the tilt lock lever.
ZMU04068
"