Ec Declaration Of Conformity - Makita RBC421L Original Instruction

Never straighten or weld damaged cutting tools.
– Operate the brush cutter with as little noise and contamination as possible.
In particular, check the correct setting of the carburetor.
– Clean the brush cutter at regular intervals and check that all screws and nuts
are well tightened.
– Never service or store the brush cutter in the vicinity of open flames.
– Always store the brush cutter in locked rooms and with an emptied fuel tank.
Observe the relevant accident prevention instructions issued by the relevant
trade associations and by the insurance companies.
Do not perform any modifications on the brush cutter as this will endanger your
safety.
The performance of maintenance or repair work by the user is limited to those
activities as described in the instruction manual. All the other work is to be
done by an Authorized Service Agent. Use only genuine spare parts and
accessories released and supplied by MAKITA.
Use of non-approved accessories and tools means increased risk of accidents.
MAKITA will not accept any liability for accidents or damage caused by the use
of non-approved cutting tools and fixing devices of cutting tools, or accessories.
First Aid
In case of accident, make sure that a first-aid box is available in the vicinity of
the cutting operations. Immediately replace any item taken from the first aid
box.
When asking for help, please give the following information:
– Place of accident
– What happened
– Number of injured persons
– Kind of injuries
– Your name
Packaging
The MAKITA brush cutter will be delivered in two protective cardboard boxes to
prevent transport damage. Cardboard is a basic raw material and is therefore
consequently reusable or suitable for recycling (waste paper recycling).
For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s):
Designation of Machine: Brush Cutter
Model No./ Type: RBC421L
Specifications: see "TECHNICAL DATA" table
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following standards or standardized documents:
EN11806
The technical documentation is kept by our authorized representative in Europe who is:
Makita International Europe Ltd.,
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by Directive 2000/14/EC was in Accordance with annex V.
Measured Sound Power Level: 114 dB
Guaranteed Sound Power Level: 118 dB
3. 11. 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
6