Lcd Display - Honeywell DHC 23 Operating Instructions Manual

OPERATION BY THE USER
8

LCD display

Heating is on continuously from 6.00 to 22.00
Weekday current
(2 = Tuesday) time
Bars of the heating times of the current day:
1 bar = 30 minutes heating
If the operating mode switch is at auto, and you have not changed the switching times
set in the factory, the bars extend from 6.00 to 22.00. This means that the heating is on
continuously from 6.00 to 22.00.
The weekday and the current time appear on the left below.
1 = Mo ... 7 = Su
On the right next to the time, symbols show the operating state of the DHC 23 or
which parts of the system the DHC 23 is just controlling. The following symbols can
appear:
The heating is on currently.
The heating is off currently
The domestic hot water is currently being heated (domestic hot water
readiness).
The district heating valve opens.
The district heating valve closes.
The district heating valve is in neutral position (no triangular symbol).
The heating circuit pump is working.
The domestic hot water charging pump(s) works (work).
Caution: The DHC 23 has detected an error (see Error messages of the
DHC 23 section).
DHC 23