Specifications - Makita LS0714 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Model
Blade diameter
Blade body thickness
Hole (arbor) diameter
Max. Miter angle
Max. Bevel angle
Max. Cutting capacities (H x W) with blade 190 mm in diameter.
Miter angle
45° (left and right)
57° (right)
(Note)
* mark indicates that a wood facing with the following thickness is used.
1: When using a wood facing 20 mm thick.
2: When using a wood facing 15 mm thick.
3: When using a wood facing 10 mm thick.
-1
No load speed (min )
Laser Type (LS0714FL/L)
Dimensions (L x W x H)
Net weight
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
To avoid injury from flying debris, keep
holding the saw head down, after
making cuts, until the blade has come to
a complete stop.
･
When performing slide cut, first pull
carriage fully and press down handle,
then push carriage toward the guide
fence.
0°
45° (left)
* 45 mm x 265 mm Note1
40 mm x 300 mm
* 45 mm x 185 mm Note2
40 mm x 212 mm
-----
LS0714: 13.1 kg, LS0714F: 13.4 kg, LS0714FL: 13.7 kg, LS0714L: 13.5 kg
END210-6
2
LS0714/ LS0714F/ LS0714FL/LS0714L
Bevel angle
0°
* 60 mm x 265 mm Note 1
52 mm x 300 mm
* 60 mm x 185 mm Note 2
52 mm x 212 mm
* 60 mm x 145 mm Note 3
52 mm x 163 mm
Red Laser 650 nm,
670 mm x 430 mm x 458 mm
･
Do not place hand or fingers close to the
blade.
･
Never look into the laser beam. Direct
laser beam may injure your eyes.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
190 mm
1.3 mm - 2.0 mm
20 mm
Left 47° , Right 57°
Left 45°, Right 5°
5° (right)
-----
40 mm x 300 mm
-----
-----
6,000
1mW ( Laser Class 2 )
and its