Makita JR3060T Instruction Manual page 7

Model JR3070CT
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model JR3060T
Work mode: cutting boards
Vibration emission (a
Uncertainty (K): 2.0 m/s
Work mode: cutting wooden beams
Vibration emission (a
Uncertainty (K): 1.5 m/s
Model JR3070CT
Work mode: cutting boards
Vibration emission (a
Uncertainty (K): 1.5 m/s
Work mode: cutting wooden beams
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Recipro Saw
Model No./Type: JR3060T, JR3070CT
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
Standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31. 12. 2013
Yasushi Fukaya
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
): 89 dB (A)
pA
): 100 dB (A)
WA
2
): 15.5 m/s
h,B
2
2
): 21.0 m/s
h,WB
2
2
): 9.5 m/s
h,B
2
2
): 10.5 m/s
h,WB
2
ENH101-17
Director
ENG900-1
ENG901-1
7