Specifications; Ec Declaration Of Conformity - Makita BLS820 Manual

SPECIFICATIONS

Model
Blade diameter....................................................................................................................... 210 mm – 216 mm
Hole (arbor) diameter
For European countries.......................................................................................................................... 30 mm
For all other countries.......................................................................................................... 25.4 mm or 25 mm
For North and Central American countries........................................................................................ 15.88 mm
Max. cutting capacities (H x W) with blade 216 mm in diameter
Miter angle
0°
45° (left and right)
-1
No load speed (min ) ................................................................................................................................. 2,300
Dimensions (L x W x H) .........................................................................................528 mm x 430 mm x 486 mm
Net weight (with battery cartridge) ........................................................................................................... 10.1 kg
Rated Voltage ...................................................................................................................................... D.C. 24 V
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 91 dB (A)
sound power level: 104 dB (A)
Uncertainty is 3 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
EN61029.
2
61 mm x 122 mm
61 mm x 85 mm
ENG015-1
2
.
Bevel angle
0°
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of standard-
ized documents,
EN61029, EN55014
in accordance with Council Directives, 89/336/EEC and
98/37/EC.
Yasuhiko Kanzaki
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes,
Bucks MK15 8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
45° (left)
45 mm x 122 mm
45 mm x 85 mm
CE 2005
Director
BLS820
ENH004-4