Day And Night Mode - D-Link DCS-960L User Manual

Section 4: Configuration
This section allows you to configure when Day and Night modes are used. Day mode uses the infrared cut filter to provide a corrected color image
for times where there is available lighting. Night mode moves the filter out of the way to use all available light, and turns on the IR LED illuminators to
allow for clear black and white video in dark areas with little to no light. After making any changes, click Save Settings.
Auto: Click Auto to allow the camera to automatically switch between Day and Night
modes based on the amount of available lighting.
Manual: Click Manual in order to manually switch between Day and Night modes from
the Live Video page.
Always Day
Click to allow the camera to always use Day Mode.
Mode:
Always Night Click to allow the camera to always use Night Mode.
Mode:
Day Mode
Click Day Mode Schedule and use the drop-down menus to set a schedule
Schedule: for your camera. This allows the camera to use Day mode during the times you
specify. The camera will automatically switch to Night mode outside the times
you specify.
D-Link DCS-960L User Manual

Day and Night Mode

42