D-Link DCS-960L User Manual page 20

Section 4: Configuration
If you are required to connect using PPPoE (Point to Point Protocol over Ethernet),
check the box to Enable and enter the User Name and Password for your PPPoE
connection. Only select this option if your camera is directly connected to your
broadband modem. If it is on a network with a router or gateway, do not select
this option.
Click Next to continue.
Step 3
If you have a Dynamic DNS account, you may have an IP address that frequently
changes. Check the box to Enable DDNS, allowing your camera to update your
IP address automatically. Enter host information as described below:
Server
Select your DDNS server from the drop-down menu and
Address:
click <<.
Host Name:
Enter the Host Name of the DDNS server.
User Name:
Enter your User Name or the e-mail address used to connect
to the DDN server.
Password:
Enter the Password used to connect to the DDNS server.
Timeout:
You can specify how often the camera notifies the DDNS
server of its current global IP address by entering a whole
number representing hours.
Click Next to continue.
D-Link DCS-960L User Manual 20