Motion Detection - D-Link DCS-960L User Manual

Section 4: Configuration
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a finite motion area that will be used for
monitoring. After making any changes, click Save Settings.
Enable Video Motion:
Check this box to enable the motion detection feature of your
camera.
Sensitivity: This setting adjusts how sensitive the camera will be to motion,
where 100% will be the most sensitive setting and 0% will be
the least sensitive setting.
Drawing Mode: Select Draw Motion Area to select the area of the picture
to monitor for movement to trigger recording or snapshot.
Use your mouse to click on the blocks that you would like to
monitor for motion. Select Erase Motion Area to remove the
blocks and stop the camera from monitoring that area of the
picture.
Clear:
Click to clear all motion detection zones.
When motion is detected in the red area you created on the image, the LIVE VIDEO page will
display a blinking orange motion video icon like the one below.
The motion notification will continue to blink as long as motion is detected. If no additional motion
is detected, it will return to its original state after eight seconds.
D-Link DCS-960L User Manual

Motion Detection

No Motion Motion
33