Note: Use this wizard if you are connecting the camera directly to a public IP address. If you are connecting the camera to a router, select DHCP Connection
(most common) or select Static IP Address to manually assign the camera its IP settings.
Step 1
The Internet Connection Setup Wizard will guide you through a step-by-step process
to configure your DCS-960L and connect it the Internet.
Click Next to continue.
Step 2
Select DHCP Connection (Dynamic Host Configuration Protocol) if you want your
DHCP server (usually enabled on your router) to assign the camera its IP settings.
If you want to manually assign the IP settings, select Static IP Address and enter
the following details from your Internet Service Provider (ISP):
Enter an IP Address for your camera.
IP Address:
Enter the Subnet Mask of your network.
Subnet Mask:
Default
Enter the Default Gateway address. This is usually the IP
Gateway:
address (LAN) of your router.
Primary DNS:
Enter the primary DNS server's IP address. This is usually also
the IP address (LAN) of your router.
Secondary DNS:
Enter the secondary DNS server's IP address. This is optional.