Installing The Punch Unit (Da-Sp41) - Panasonic DP-C305 Service Manual

9.11. Installing the Punch Unit (DA-SP41)

9.11.1. Contents
No. Qty.
1 1
2 1
3 1
4 1
5 1
6 1
7 1
1
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories detail.
9.11.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
Front Door
Screw
Ver. 1.1
Description
Punch Unit
Punch Relay Harness
Punch Relay Harness
Jam Removal Label
Punch Dust Label
Screw (M4 x 6)
Installation Instructions
2
Screw
Jam
Release
Dial
Tab
This Document
3 4
1. Removing the Packing Material
(1) Take the Punch Unit, and the accessories out of
the package.
(2) Remove the Tapes securing the Covers, and the
Front Door.
2. Preparations for Finisher Installation
(1) Turn OFF the Host Machine, and disconnect the
Interface Cable of the Finisher from the Host
Machine.
(2) Release the Latch on the Finisher, and separate
the Finisher from the host machine.
(3) Open the Front Door. Holding the tab with your
fingers, remove the Jam Release Dial.
(4) Remove 2 Screws.
695
DP-C405/C305/C265
Remarks
5 6
7
FEB 2008