Continuous Polling (Station Mode) - Panasonic DP-C305 Service Manual

No. Parameter
141 T/P Density (It)
142 Photo Density (It) -32
143~ Not Used
145
146 T / P Density (dk) -32
147 Photo Density
(dk)
148~ Not Used
174
175 Fax/Email Default Adr.Book
176~ Not Used
199
Note 1:

Continuous Polling (Station Mode)

This feature allows you to store, or add documents into a polled file in memory.
To enable the Continuous Polling feature set Function Parameter No. 003 to "2:Station".
The last Program Key will be assigned with the "Store 4 Poll" Key name automatically,
and cannot be changed.
To prepare the document(s) to be polled, simply place the document(s) on the ADF or Platen,
and then press the Program Key to store, or add the document(s) into a polled file.
(Note: If a regular polled file is stored in memory, the Program Key for Continuous Polling will
not be accepted.)
Note 2: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP, or RTN/PIN
Signal
MCF
RTP
RTN
Note 3: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP, or RTN/PIN
Note 4: The default setting of parameters depends on the country's specifications, or regulations. Print the
Function Parameter List to confirm the default settings.
Ver. 1.1
Function Parameter Table
Selections
-32
~
+31
~
+31
~
+31
-32
~
+31
ModeSet
128 256
0-31 0-63
32-63 64-127
64-127 128-255
Signal
5%
MCF 0-2
RTP 3-4
RTN 5-
Adjustment of Text / Photo density.
Adjustment of Photo density.
Adjustment of Text / Photo density for dark.
Adjustment of Photo density for dark.
Setting
512 1024
0-127 0-255
128-255 256-511
256-511 512-1023
Setting
10% 15%
0-4 0-7
5-9 8-14
10- 15-
570
DP-C405/C305/C265
Function
2048 Off
0-511 Always
512-1023 -
1024-2047 -
20%
0-9
10-19
20-
FEB 2008