Wiring Diagram - Makita DF347D Technical Information

W
iring diagram
Fig. D-2
Wire connecting portions
of Flag receptacles
Connect Flag receptacles
Terminal
so that the wire connecting
portions face +, - and AS
marks on Terminal.
Fig. D-4
Put the slacks of Lead wires
in this space.
Pass Lead wires (black, red)
through ø10-30mm Line filter,
and put the line filter as drawn
right.
Fix Lead wires in Lead wire holder here.
Be sure to put Lead wire (yellow) to
the bottom and pile Lead wires (black,.
red) on it.
Pass Lead wires (black, red) through
ø10-11 mm Line filter, and put
the line filter in the place between
Ribs.
Line filter
(Diameter ø10-30 mm)
Line filter
(Diameter ø10-11 mm)
Note: Line fiters are not used for some countries.
Fig. D-3
Connect Flag receptacles so that the wire connecting
portions face Housing L side.
Housing L
DC motor
Switch
Ribs
Terminal
P 6/ 6
Red mark
Wire connecting
portions of
Flag receptacles
Housing L
Fix the Lead wire (yellow)
in Lead wire holder here.