Operational Check For The Remote Control - Motorola DCT3080 Installation Manual

Code Description
Platform ID
found
Eb18
Object size
mismatch
Eb19
Object size
failed range
check
Eb20
Invalid SUDB
pointer

Operational Check for the Remote Control

The operational check tests communication with the remote control:
Table 2-6
Operational check procedures
Feature
Power on
Channel
selection
Volume
control
If the DCT3080 does not operate properly, refer to Section 5,
"Troubleshooting."
When Error Occurs
OOB frequencies (LED then
displays Eb 02, indicating
the software object download
was unsuccessful.)
After the LED displays dl,
indicating failed during
attempted download
After the LED displays dl,
indicating failed during
attempted download
After plugging the terminal
into an electrical outlet to
begin the boot cycle
Testing Procedure
Press on the remote control to turn on the DCT3080.
POWER
Tune to the output channel (3 or 4).
Scan through the channels using the
Tune to several channels by entering the channel number using
the numeric keys.
Press + or - on the remote control to increase the
VOLUME
volume to its upper limit, lowest level, and to a comfortable
level.
Press to turn the sound off. Press
MUTE
the sound.
DCT3080 Installation Manual
CHANNEL
36
Action Required
operator
Contact headend
operator
Contact headend
operator
None
+ or - keys.
again to restore
MUTE