Table of Contents
Advertisement
Frequency
Mode
Channel
ID
Power
Level
Symbol
Rate
Known MAC
Addresses
The center frequency of the channel to which the DOCSIS
upstream channel receiver is tuned. It can be 5 to 42 MHz. If
the value is invalid or cannot be retrieved, Carrier Lock is NO;
if DOCSIS is not enabled, N/A is displayed.
The DOCSIS upstream channel modulation: QPSK, QAM 8,
QAM 16, QAM 32, QAM 64, or QAM 128. If the value is invalid
or cannot be retrieved, or DOCSIS is not enabled, N/A is
displayed.
The upstream channel identifier 0 to 255. If the value is invalid
or cannot be retrieved, or DOCSIS is not enabled, N/A is
displayed.
The upstream channel power level in dBmV. If the value is
invalid or cannot be retrieved, or DOCSIS is not enabled, 000
is displayed.
The upstream channel symbol rate in mega-symbols per
second. If the value is invalid or cannot be retrieved, or
DOCSIS is not enabled, 0.000 is displayed.
Displays up to 32 MAC addresses learned by the DCT3080
cable modem, including the Set-Top MAC and future MAC
addresses assigned by DSG, in hexadecimal format
xx:xx:xx:xx:xx:xx on two screens if necessary. If the value is
invalid or cannot be retrieved, or DOCSIS is not enabled, no
values are displayed.
DCT3080 Installation Manual
80
Advertisement
Table of Contents
